Q37題材吊鉤式拋丸進行清潔機

◆新產品就說明 Product description

Q37(Q75)系類吊鉤式拋(噴)丸請理機這是我集團公司制造的本身新式機械。是在國體內外外廣泛的走訪調研的基本條件上，給出朋友的現實情況需要量而設計構思的。

吊鉤式拋丸機廠家兼備接下來優勢：：

1. 選用大拋丸量、高拋射訪問速度的懸臂式離心分離拋丸器，能偏態地不斷提高清潔率、榮獲理想的清潔水平。

2. 模擬仿真拋射圖及拋丸清理機的全部圖紙文件均基本分為算起機捕助設計構思(CAD)編寫，拋丸器的配用及安裝更應該節省。

3. 利用備受歡迎圖片的無地坑結構類型模式，即節約了了地坑基礎框架的建筑花銷按時間，又化解了粉絲因地坑滲水而發生的加快機內的丸砂腐蝕起塊話題。

吊鉤具有著上升下降、程序運行和酒店內360度旋轉的的功能。

4. 處理屋內采取高鉻板預防，選擇使用時間洋洋提升，看上去美感、更易變更。

自己：需拋丸治理 的軸類零件隨時掛在在吊鉤或掛架子上，人工費帶至拋丸室前部的制動系統化，吊鉤自己開啟拋丸室。吊鉤開啟拋丸室后，拋丸室門將液壓倒閉，電力工程火災報警系統，以盡量不要軸類零件在拋丸房間內吊頂確定拋丸治理 時個別人誤開拋丸室門。吊鉤開啟拋丸室在修改的差值位置上作一來一回往復式的運動和自轉，使軸類零件由于充分的拋射，降低拋射墻邊。二個吊鉤、一種吊鉤在拋丸房間內吊頂拋射，另一個說的是種吊鉤可裝載卸載軸類零件。拋丸治理 的時長可中任何調正。拋丸器停止工作暖機后拋丸室門打開瀏覽器，以帶進和帶出軸類零件。拋丸治理 中生成的塵土由一級布袋除塵器設備篩選廢氣排放。

Q37(Q75) hook typeshot cleaning machine is a new equipment developed by our company. It is widely based on the research of the user, according to the actual needs of the design at home and abroad.

Advantages:

1. The amount shot, high speed of aerosol propellant international advanced cantilever centrifugal peen-forming implement, can improve clean rate, obtain satisfactory cleaning quality.

2. Trajectory simulation diagram and the machine shot all drawings are completely using computer aided design (CAD) is drawn, is shot selection and arrangement of the more reasonable.

3. The highly popular no pit structure , namely save the pit of the construction cost and time based, and solves the user for pit and cause the ascension of the standing device inside the pill sand. Corrosion agglomerate hook up with, operation, and the function of the indoor spin.

4. Clean indoor with using high chrome plate protection, service life greatly improved, beautiful appearance, easy to change.

Automatic: The workpiece need to shot is directlyhanged in the treatment or hang hooks on toshot, artificial with the front of the room, hook automatic traction systemshot into the room. Hook into is shot peen-forming room after room, pneumatic, electric interlocking goalkeeper closed, in order to avoid the workpiece in indoors is shot peen-forming processing by mistake when others open peen-forming room door. Hook into the room is shot in the back and forth position set interval reciprocal motion and rotation, to make the work be fully aerosol propellant, reduce aerosol propellant blind Angle. Two hooks, a hook on peen-forming indoor aerosol propellant, another hook can be unloading workpieces. Peen-forming processing time can be arbitrary adjustment. After the stop is shot peen-forming room door open, in order to bring in and take workpiece.Shot in the treatment of dust produced by secondary filter filter emissions.

◆符合時間范圍 Applicable scope

錳鋼屬壓鑄件、鋅不銹鋼管屬壓鑄件、銅鑄件、不銹鋼管緊密鑄件、塑料件、大排摩托車窗框及不銹鋼鋼板網品件的外壁請理、光飾、提升。

Aluminium alloy die casting, zinc alloy die casting, the copper pieces, stainless steel precision castings, castings, motorcycle frame and steel products a surface cleaning, light act the role ofing, strengthening.

Q37品類吊鉤式拋丸進行清潔機

◆貨品特質 Product features

1、參考英國八十五朝代末的通過式拋丸機來國產化生產加工。

2、拋丸器分為直聯發交流電動機馬達驅程，發交流電動機馬達為變頻柜發交流電動機馬達，可變氣門正時頻柜調節。

3、鋼丸2g流量控制閥可氫化物發生器自動調節，氣動系統進入與取消。

4、用芯筒脈沖造成的清灰器原理式清灰操作系統。

5、電力電氣用到PLC調控PLC有效控制儀配用英國PLC，電器開關電子器件配用PLC或歐姆龍物料。

6、無地坑制定。

1. Peference toGermany at the end of the ninety’s shot used the machine manufacturing.

2. Shot machinehas the direct coupling motor drive, motor for frequency conversion motor,variable frequency speed regulation.

3. Steel shot flow control valves can trace adjustment, pneumatic open and shut.

4. The world's most advanced core canister pulse blow type dust removal system.

5. Electrical PLC control PLC control instrument selection Japan mitsubishi, electricalcomponents choose Siemens or omron products.

6. Design without pit.

◆服務反映 Product description

1、在標準規定門焊機中，拋丸機廠家配帶電動式式底盤系統化。

2、這對重形鋁件，拋丸機廠家待選變配電動桃胡。

3、拋丸室的門有氣動平衡或手動式開啟閉合。

1. In the standard model, shot machine is equipped with manual suspension system.

2. For heavy workpiece, shot machine can be equipped with electric hoist.

3. The door of the room has a pneumatic or manual opening and closing.

人工操作：本型清潔機適于精鑄、房屋、化工新材料、電機的、數控等業內的中、中大型鑄、鍛件的界面清潔或增幅補救。相當適于多茶葉品類、小快速的鑄件、鍛件、鋁金屬鑄件及鋼構成件參與界面清潔及拋丸增幅，以弄掉類件界面的一點粘砂、砂芯及氧化物皮；亦適于對熱補救件的界面清潔及增幅；十分適于不易對撞的細長、溥壁件的清潔。

manual operation: This type of cleaning machine for foundry, construction, chemical, electric machine, machine tools, and other industries, small casting, forging of surface cleaning or strengthen treatment. Particularly suitable for variety of and small batch of castings, forgings, aluminum alloy castings steel structure and surface cleaning and peen-forming reinforcement to remove a small amount of the surface adhering sand, sand core and oxide skin; Also suitable for heat treatment a surface cleaning and strengthened; Especially suitable for long, should not be collision thin-walled package to clear.

We use shot technology to achieveshot cleaning rust, strengthen the purpose, because cleaning now is still the world's most economic and the most reliable method.

◆產品設備基本特征 Product features

* 延長機械化新產品和輕金屬結構’的抗困倦效能

Lmproving the anti-fatigueperformance ofmechanical products and metal components

* 清理載荷多

Eliminate stress concentration

* 加長其用到期限

Prolong the service life

* 優化調整鋁件的外層的工藝模式

Optimizate the surface of the workpiece

* 能大大升高消除學習效率

Greatly improve the efficiency of cleaning up

* 降低請理任務的勞動者撓度

Reduce the labor intensity of cleaning up

* 消除生態污染環境

Reduce environmental pollution

◆適用性范圍圖 Applicable scope

本型設備比較廣泛廣泛運使用機制產生、工作機制、礦山開采機制、壓為溶器、新汽車、港口碼頭等服務行業，使用提生其設備零部分的油漆顏色質量和面上技術心態。

This equipment is widely used in mechanical manufacturing, engineering machinery, mining machinery, pressure vessel, automobile, shipbuilding industry, used for improving the product quality and the appearance of the parts surface process condition.

◆具體技術性性能指標 Main technical parameters