噴砂（丸）房系列表成品

船泊按段表面處理房-港口碼頭特涂裝備

Ship section coating room-special ship coating equipment

1、有一套硬性要求性涂裝生產線道路施工技術規范；目的意義是護理海底大環境；一遍、分次處里Sa2.5級；另一種以確保涂膜夢想用質保期15年安裝技術應用。

2、（角處園角）2mm；鍍層嚴重破壞多于2%或25m2,噴砂清理Sa2.5級。

3、（粗糟度）30-75um；外面體溫比露點高3℃；干膜寬度320um。

4、（顆粒狀的大小）3、4、5粉塵分布不均1級；光學顯微鏡隱約可見更小塵土祛除。

5、（氯化鈉）50mg/m2；500總噸船用這里的海水艙；150m長散貨船雙舷側。

6、涂料能力尺寸規格書6主體：企業產商品名號稱、表層物料、裝修工程的辦法、膜厚範圍、前治理、條件。

7、70%Sa2級（試驗裝置相沖格底漆）；不達標的底漆掃砂或超高壓水清晰。

8、（對應空氣濕度）乘以85%。

9、90/10條件：90%以達到標淮值，10%到達標準化值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

跟據管理規范規范，我的服務于幾率有以下：

1、各位不錯感覺僅有表面處理房不需能擁有PSPC規定，不會噴涂工藝設備房更不可能滿足需要規定；那么不會噴涂工藝設備房的我們公司的需要作用開發，有噴涂工藝設備房的我們公司的需要作用落實。

2、15年運用質保期的制約，可以對各種行業中有辯訴交易制度能力。

3、周圍環境人們不錯保證無害源。

4、Sa2.5級后果著高效化噴砂和回收并程序的動用和增強。

5、滑度調節意示著耐磨材料溶合器的要提供了（另存細顆粒肥料，清掉粉層）。

6、氣溫、氣溫、板材厚度測試器材運行率大幅度提生。

7、含鹽量、衛生度、塵土判斷很大招標采購。

8、漆層除塵機械（電動伸縮、汽動、防爆型）一大批應用。

9、涂料房照明工作安全設施將需用有所改善，采用家用燈具、設計構思布設、配置安裝。

10、為要確保生態束縛的條件：合理可行的濾塵設計、工業節能的升溫設計、正規的去濕設計成為了噴漆工藝土建工程必須要裝備。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

對于船舶制造修造產業IMO表層耐腐蝕性的標準(PSPC)的實施，斯特爾機械提供船舶噴砂涂裝設備系統整體解決方案及技術支持，為船舶修造行業設計制造完善的船舶分段噴砂房噴漆房，鋼板拋丸預處理線，舾裝件、艙口蓋等船體部件二次分段涂裝房，壓載艙特涂設備，連續高效噴砂設備及回砂系統設備，精準的砂塵分離裝置，環保節能型除塵設備，大中型真空吸砂設備，組合式除濕機，高效暖風機，移動防爆風機，電動/氣動彈簧/防震型集塵機器設施設施設備，進行高壓水進行維護洗滌機器設施設施設備，溫暖、干濕度、厚薄的測試議器，海水鹽度、洗滌度、塵埃用的測試機器設施設施設備。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.